How to adjust / pre load wastegate actuator

Get this sound with YouTube MP3jam
1. Remove C clip on the waste gate arm 2. Undo the nut that holds the rod extender. 3. Rotate the actuator extender clock wise so shorten overall length. 4. The actuator rod should be half hole length short to the wastegate arm when waste gate is fully shut. 5. Pull the actuator extender towards the exhaust side and securer the extender. 6. Fit the C clip back to waste gate arm. 7. Tighten the extender nut. Job done
Post Comment
Thank you! Your comment is awaiting moderation.